Stage 1: The Suspension
Stage 2: The Brakes
Stage 3: The Brake Booster
These installation photos show the Prodrive suspension, STi brakes, stainless brake lines and single-stage booster being installed on my 98 RS. I had GT Classics in Charlottesville, VA do the work, so this is more of a photographic look at the installation than a step-by-step procedure.
I'm not a mechanic, so this information likely has some mistakes in it. Use the photos as a guide more than my text!
Stage I: The Suspension
Installing the Prodrive kit is essentially the same as installing the STi v5 suspension.
| The Prodrive suspension compared to the stock suspension. |
| 
| The fully assembled Prodrive suspension. Note that when assembling the Prodrive strut and spring with the stock top mount that the Prodrive bump stop is internal. |
Stage 1: The Suspension
Stage 2: The Brakes
Stage 3: The Brake Booster